Service Centre - Max 80045 Gebrauchsanweisung

UNIVERSAL TRESTLE WITH TELESCOPIC LEGS
Please refer to the illustrations at the back
of these user instructions. The assembly
instructions apply to one universal trestle.
Both universal trestles are assembled in the
same way.
Parts (per universal trestle)
ID Part
1 Boom
2 Frame
3 Legs
4 Bag with loose parts
A Screws
B Large wing nuts
C Lock tab
D Small wing nuts
E Lock clamps
Assembly
Figures 1-2
Push one leg (3) into each socket on the
frame and lock them in place using one of
the lock clamps on each side. Please note
that the legs must be set to the same height
on both sides.
Figure 3
Insert the boom down into the forks on the
frame and secure it using one screw (A) and
one large wing nut (B) on each side. The
threads in the boom must face downwards.
Figure 4
Unfold the frame until it locks onto the
boom. Place a lock tab (C) over the thread
underneath the boom and secure it with a
small wing nut on each side.
6
Figure 5
The universal trestle is now ready for use.
Use
Unfold the universal trestles and lock them
using the lock tabs.
Adjust the legs to the required height using
Qty
the lock clamps.
1

Service centre

2
4
Note: Please quote the product model
1
number in connection with all inquiries.
2
The model number is shown on the front of
this manual and on the product rating plate.
2
For:
2
• Complaints
2
• Replacements parts
4
• Returns
• Guarantee issues
• www.schou.com
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
© 2019 Schou Company A/S
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.