Change The Password; Pip Mode; Dvb-T Stb7); System Settings - Avermedia STB5 Handbuch

4.2.3 Change the Password

1. Press MENU to enter the menu. Choose "User Settings" → "Parental Lock"
setup page.
2. Select "Change PIN" and the "Change Parental
PIN" box will appear.
3. Press the numeric button on the remote conotrl to
enter your old password and specify the new one.
Finally, enter the same new password again for
confirmation.（The default password is 0000 (four
zero)）。
(※This function is only for AVerMedia

4.2.4 PIP Mode

This feature can display the main signal and auxiliary input signal simultaneously so
that you can watch digital TV and work on your PC at the same time.
1. Press PIP on the remote control to enter the PIP mode.
2. If you want to adjust the size of the small screen, please press Menu to enter
the main menu.
3. Select "User Settings" → "PIP Settings". The system provides "1/4"、"1/9" and
"1/16" for your selection. For instance, when you choose 1/4 PIP mode, the
system displays a 1/4 small screen on the main screen.
Press LIST/OK to save the settings.
4. To adjust the position of the small screen, press PIP Move on the remote
control first. Then you can move the small screen by using the arrow buttons
/▼/◄/►
( )
。
▲
Note :
Press PIP Move on the remote control again to switch channels or adjust volume.

4.3 System Settings

This feature allows you to set the OSD language, revert to the default settgins and so on.

4.3.1 System Setup

Press MENU to enter the menu. Choose "System Settings" → "System Setup" setup
page. You can select the desired language and change the display aspect ratio.
User's Manual
Change Parental PIN
Old PIN
New PIN
Confirm New PIN
OK
®

DVB-T STB7)

17