Dvb-T Stb5/Stb7; Making Configuration; Basic Operation; First Time Setting Wizard - Avermedia STB5 Handbuch

Chapter 3 Using AVerMedia

3.1 Making Configuration

If this is your first time to use AVerMedia
channels to get locally active channels. Before scanning, it is very important to
understand how to enter menu or set up some basic configurations first. For more
information, please refer to the description below.

3.1.1 Basic Operation

Before entering the menu, keep in mind that the current selection is highlighted with
YELLOW color in the menu. Refer to the following steps for how to enter and
change the menu settings.
1. To enter the OSD menu, press the MENU button on the remote control, and you
will see six main menus on the screen.
▼
2. Press or
▲
enter the sub menu.
▼
3. Press or
▲
settings such as Country or Language, Press ◄ or ► to switch between the
preset options.
4. Press MENU or LIST/OK on the remote control to save the change and exit the
current page.
5. To return to real-time TV, press EXIT repeatedly.
6. The icon like this
button, green button, blue button, or some gray button such as MENU on the
remote control.

3.1.2 First Time Setting Wizard

If this is your first time to use AVerMedia
Wizard dialog box will appear. Follow the instruction on the screen to scan channels
and do some basic configurations.
Note : If you exit this setup page by accident, first press MENU on the remote
control, choose "System Setting"→ "First Time Setting Wizard", and then you
can enter this page again.
1. To start the "First Time Setting Wizard", press
select YES and press LIST/OK.
to select the desired main menu and press LIST/OK or
again to select the setup item you want. To change the original
appeared on the screen represents the red button, yellow
®

DVB-T STB5/STB7

®
DVB-T STB5/STB7, you need to scan
®
DVB-T STB5/STB7, the First Time Setting
◄ ►
or
User's Manual
►
to
on the remote control to
7