Swim & Fun Solar Shower 16 L Montageanleitung Seite 23

UK
3. Secure the shower head to the shower
pipe. Then fasten the shower head to
the top of the upper part of the solar
shower.
Use packing tape around all threads.
Please note
The thread must be completely covered with packing tape. Please also note that with
packing tape attached, items can only be turned clockwise. If you turn anti-clockwise
there is a risk of the join not being sealed properly. Do not use the tool for the snap.
4. Put the upper part of the solar shower
on top of the lower part and press
together (fig. 3).
Assembling can be tight.
Rotate the locking ring clockwise for
a stable assembly of upper and lower
tubes.
Important
The fixture tap and the shower head must face the same way.
Sealing!
Attach at least 15 laps of sealing tape on all threads.
MV-1010-10-2017 . © All rights reserved Swim & Fun Scandinavia ApS
Fig 2
Fig 3
Page 23