Vego PARKSMART Bedienungsanleitung Seite 18

Manual Setting Mode for the Parking Time (In Parking Mode)
1. Press the B button for three seconds. On the large and small display,
the next half hour or full hour of the current time is displayed. Each
time button B is pressed, the time is added by half an hour and
statically displayed on the large and small displays. When the vehicle
is moving, the display rule of the automatic parking display is applied.
2. If you have made the manual adjustment and the vehicle is not moving
(in park state), you must check the current time. Press button A once to
display the current time. After 5 seconds, the previously set parking
time is displayed again.
Stand: 25.06.2019; Version 3.0
 18