Sony VPS-415RF Bedienungsanleitung Seite 7

Attaching to the Projection Wall Unit
Attaching the Screen
1
Screen lock knob
Locked
2
Screen
hook
3
A
4
Dowels
Unlocked
Dowels
Attach the screen to the RVP-411DS/411DMS or RVP-
511DS/511DMS projection wall unit.
1
Turn the two screen lock knobs at the rear of the
projector while pushing them to unlock.
2
Push to protrude the two screen hooks on the front
of the projector and align the two projections of
both screen hooks with the holes on the reverse of
the screen frame. Then push the screen down
slowly.
3
Push the upper sides of the screen frame gently
until it clicks to fit in.
4
Turn the screen lock knobs until the two dowels on
the knob are aligned to lock the screen.
CAUTION
• Do not hold the screen hooks on the cabinet when
stacking the projectors at a high place. If do so, the
screen hooks may break and you may fall and injure
yourself.
• Do not pull the lower part of the screen frame
(around A) forcibly after it is fitted. If do so, the
screen hooks may break and the screen frame cannot
be locked.
EN
7