Emerio FN-109083 Bedienungsanleitung Seite 5

PARTS DESCRIPTION
1. Fan with protective fan guard
2. Oscillation button
3. Screw for the elevation adjustment
4. Speed switch
5. Mains cable
6. Fastening screw
7. Pipe fastening screw
8. Upper standing shaft
9. Lower standing shaft
10. Base
ASSEMBLING INSTRUCTIONS

Take the screws from the bottom of the lower standing shaft (9).

Attach the base (10) onto the lower standing shaft (9). Fix the base firmly with the screws provided.

Put the upper standing shaft (8) onto the lower standing shaft (9). Connect them and fix with the pipe
fastening screw (7).

Insert the fan head part into the standing shaft. Fix it with the fastening screw (6).
OPERATING INSTRUCTIONS
1. Plug the power cord into a suitable socket.
2. Switch on the fan by using the speed buttons on the control panel, i.e. "
medium speed, " " = high speed.
3. Tilting angles: You can loosen the screw on the side of the shaft to adjust the fan to your preferred elevation.
Then fasten the elevation by tightening the screw.
- 4 -
" = off, " " = low speed, " " =
FN-109083