PLANT!T Aqua Garden Anleitung Seite 3

90°
Setting up
Make sure your plants get plenty
of natural daylight, a minimum of
12 hours per day. Either in full
sunlight, a south facing greenhouse,
balcony or large window, or with
the use of our ROOT!T Full Spectrum
12 hr
LED Grow Light (sold separately).
PLANT!T Starter Pack
In the PLANT!T Starter Pack you will find ROOT!T Rooting Sponges and
ROOT!T First Feed. ROOT!T's high-quality peat-based sponges are designed
for professional propagation and growing - providing excellent results.
ROOT!T First Feed is a unique plant feed that will provide your seeds and
seedlings with all the correct nutrients they require to develop quicker.
How to use ROOT!T Rooting Sponges:
1. Pre-soak your ROOT!T Rooting Sponges by dipping them in a jug of water
and squeeze out any excess.
2. Place a ROOT!T Rooting Sponge in every pot in your unit.
3. Put one or more seeds 3-5 mm deep into each hole.
4. Water your seeds by hand with water only until they germinate.
5. Once the seeds have germinated, fill the tank with nutrient solution,
plug the Aqua Garden by PLANT!T unit in and let it irrigate you
plants automatically.
8. Place the column
into the lid and
rotate clockwise
until it clicks into
place.
9. Feed the cable
through all cable
management
points making sure
it comes out of
the lid.
10. Applying
USB Plug
11. Place the lid on top of
the tank so it fits into
place. The lid should be
positioned slightly
under the level of the
tank walls. If it doesn't fit
in grooves in the bottom
of the tank, make sure
both parts of the support
column are rotated to the end, as well as that the
support column connected to the lid is rotated to the
maximum. Then try to place the lid with the column
back in the tank again.
12. Finally, place the cover on the lid ensuring it clicks
into place.
Your Aqua Garden by PLANT!T is now ready to go!
17 ˚C to 25 ˚C