Application; Safety Information; Faults And Damage - Ecom Lite-Ex PL 10e H Bedienungsanleitung

1. Application

The Lite-Ex PL 10e H is a compact and rugged LED
®
headlamp that is designed for industrial application in poten-
tially explosive areas classified as Zone 2, 1 and 0, as well as
Zone 22, 21 and 20 in accordance with directive 1999/92/
EC (ATEX).

2. Safety information

These operating instructions contain information and safety
regulations which are to be observed without fail for safe
operation in the described conditions. Non-observance
of this information and these instructions can have serious
consequences or it may violate regulations.
Please read these operating instructions carefully before
starting to use the unit! In case of any doubt (in the form
of translation or printing errors) the German language
operating instructions shall apply.

3. Faults and damage

If there is any reason to suspect that the safety of the unit
has been impaired, it must be withdrawn from use and
removed immediately from the Ex-area.
Measures must be taken to prevent it from being restarted
accidentally.
We recommend that the unit is returned to the manufactu-
rer for inspection.
The safety of the unit may be compromised, if, for example:
- there is visible damage to the housing.
- the unit has been subjected to excessive loads.
- the unit has been improperly stored.
- the unit has been damaged in transit.
- unit markings or inscriptions are illegible.
- malfunctions occur.
- permitted limit values have been exceeded.
4