Herunterladen Inhalt Inhalt Diese Seite drucken

Quick Start Guide; Vacuum Cleaner; Intended Use; Safety Instructions - nedis VCBG300BK Kurzanleitung

Vacuum cleaner with bag and 8m range
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
a

Quick start guide

Vacuum cleaner

For more information see the extended manual
online: ned.is/vcbg300bk

Intended use

This device is exclusively intended as a vacuum cleaner for indoor use.
The product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
Bent end
2
Tube
3
Accessory nozzle
4
Rewind button
5
Floor brush
6
Power cable
7
Air outlet filter
8
Wheels

Safety instructions

-
WARNING
Do not use the product if a part is damaged or defective.
Replace a damaged or defective device immediately.
Keep hair, loose clothing, fingers and all body parts away from
openings and moving parts.
This product can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
product in a safe way and understand the hazards involved.
Children shall not play with the product. Cleaning and user
maintenance shall not be done by children without supervision.
Do not immerse the product in water.
Do not use the power cable to carry the device.
Only use the product as described in this manual.
Do not unplug the product by pulling on the cable. Always
grasp the plug and pull.
Do not close a door on the power cable.
Do not put any objects into openings. Do not use with any
opening blocked. Keep free of dust, lint hair etc.
Do not pull the power cable over sharp edges.
Turn off all controls before plugging or unplugging vacuum cleaner.
Do not vacuum hard or sharp objects such as glass nails, screws,
coins etc.
Do not vacuum hot coals, cigarettes, matches or any hot
smoking or burning objects.
Do not use without filters in place.
Always unplug the appliance before connecting or disconnecting
vacuum hose. Do not allow plug to whip when rewinding.
VCBG300BK_MAN_COMP_0919_print_(19388 1422)_v02.indd 7
VCBG300BK
9
Hose
10
Dust bag
11
Power button
12
Front cover
13
Dust bag full indicator
14
Suction hole
15
Motor filter
16
Dust bag holder
Do not vacuum toxic material (chlorine bleach, ammonia, drain
cleaner, etc.)
Do not use in an enclosed space filled with vapors given off by
oil-based paints, paint thinner, moth proofing, flammable dust,
or other explosive or toxic vapors.
Keep the end of the hose, wands and other openings away from
your face and body.
Store your appliance indoor in a cool, dry area.
Use extra care when vacuuming on stairs.
Only use on dry, indoor surfaces.
Do not vacuum flammable or combustible materials (lighter fluid,
gasoline, etc.) or use in the presence of explosive liquids or vapor.
Do not use the cleaner to clean your pets or any animal.
If you hear a squeaking sound and suction power is reduced,
unplug the device and clear of blockages and clean the air filter.
Keep the head (eyes, ear, mouth, etc.) away from the openings,
when the cleaner is working or plugging.
Prepare the vacuum cleaner (image B)
8
1. Insert the end of A
into A
2
8
2. Attach A
to A
by fitting it into A
5
3. Fit A
or the desired nozzle A
Use the vacuum cleaner
4
Always remove the power plug from the power outlet before
assembling or removing accessories.
4
When unwinding, guide the power cable with your free hand to
ensure it does not whip, cause damage or injury.
4
There are two marks on the power cable.
The yellow mark shows the ideal cable length.
The red mark shows the maximum cable length.
6
1. Unwind A
and plug it into a power outlet.
q
2. Use A
to switch on the device.
6
4
3. To rewind A
, press A
4
The product will switch off automatically when overheating.
In case of overheating, follow these steps:
1. Use the power button to switch off the device. Unplug the
power cable from the power oulet.
2. Change the dust bag and clean the filters.
3. Allow the product to cool down for approximately 1 hour before
using again.
Changing dust bag (image C)
4
The dust bag should be changed as soon as the dust bag full
r
indicator A
shows it is full. Additional dust bags are not
included.
r
1. Open A
.
9
t
2. Slide A
out of A
and dispose.
9
3. Place a new A
in the vacuum cleaner by sliding it into A
r
4. Close A
.
7
e
until it snaps in position.
1
.
3
2
to A
.
.
t
19-9-2019 16:01:10
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis