Mousetrapper MTkeys Erste Schritte Seite 3

English
1 Connecting Mousetrapper
Installation
Connect the supplied cable to the socket on the left
side of your Mousetrapper, and connect the other end
to a USB port on the computer. Once installed, your
Mousetrapper and its buttons will operate as shown
in figure 2.
Changing from Mac to PC configuration
The product is configured for PC on delivery. To
configure it for Mac, simultaneously depress the lower
right button and the upper left button (Copy and Paste)
for 3–4 seconds. The LED will flash red to confirm the
configuration. Repeat the procedure to change back to
PC configuration.
2 Basic tips
Positioning
Position your Mousetrapper between you and your
keyboard. The space bar on the keyboard should
be directly in front of the control pad, as shown in
figure 1. If you have a low keyboard, unfold the
keyboard support from underneath your Mousetrapper
and place the keyboard on top of it.
Scrolling
To scroll using the control pad, place your finger on the
right edge of the control pad. There is no need to press
on the control pad, simply slide your finger up or down
the edge, depending on which way you want to scroll.
Replacement of pads
The pads can be replaced when they are worn out. To
remove a pad, insert a flat tool between the frame and
the Mousetrapper and gently prise the frame/pad out
of the Mousetrapper. You can order new pads via your
dealer or directly from Mousetrapper.
3 Customising
MTKeys
To customise the button functions, go to
mousetrapper.com/mtkeys and download the software.
Then follow the instructions. If you have Windows 10,
you can download MTKeys from Windows Store.
When you have downloaded MTKeys, an image of the
product will appear that matches the image underneath
your Mousetrapper. Position the cursor over the button
you want to customise. Click on it by lightly pressing
the control pad once. You will see a pull-down menu
that lets you assign whichever action you want to
that button. You can choose between functions such
as adding an extra left-click, creating shortcuts and
inserting text by pasting it in.