Never expose the electrical parts of the
mixer to water.
Please note that the concrete mixer vibrates
when the drum is rotating. It should be
placed on a flat, stable and solid surface so
that it does not slip or tip over.
Do not put your hands, tools or instruments
in the drum when it is rotating.
The drum must be rotating when you fill
or empty it. Please note the direction of
rotation, which is specified on the drum.
If the concrete mixer is damaged, the parts
affected must be replaced with new original
spare parts before using it again.
1
Main components
1. Motor housing
2. Gasket
3. Hand wheel
4. Upper drum section
5. Lower drum section
2
4
3
5
DK
NO
SE
FI
GB
DE
PL
ET
35