Atlantis +CamHD 7000-Serie Kurzanleitung Seite 17

Install Security7000 on Apple/Android devices
 Download and install (from the App Store or Play Store) on your iPhone / iPad /
Android Security7000 application. Tap the App Store icon / PlayStore, then
Search, and enter Atlantis Security7000. The application is free.

Start now Security7000.
 You must create an account. When you will use these credentials from another
device, all + CamHD7000 connected will be displayed automatically. Tap Create
Account. Enter an email address and a password and tap Create Account. At this
point you can add to your account all + CamHD you desire.
+CamHDMotor7000 & +CamHDOutdoor7000 via LAN
 Connect the power supply to the power grid, then the +Cam HD to the LAN by
network cable, and finally connect the power supply to +CamHD.
 Tap on [ ]+ at the top right, next to the words My +CamHD and touch on
Scan LAN Device This option will discover all + CamHD connected to your LAN
(the SmartPhone must be connected to the same wireless network where CamHD
+ is connected by cable). Tap on the ID of +CamHD found (outline in red, with
the words NEW) and touch again on Add.
[+CamHDMotor7000] Or tap on [
next to the words My +Cam and touch on Add by ID, type
in +CamID the code on the product label, then type in a
name nickname intuitive that allow you to remember it, and
then touch Save.
You can now connect a +CamHD by wireless that was initially
attached by cable. Tap Settings +CamHD the main screen, and
then tap on the +CamHD that you want to connect by via
wireless (in the case of the Outdoor models make sure you have
first connected the removable antenna). Tap the Network
Settings and then tap on Wi-Fi Settings. Touch on the
network you want to connect +CamHD and then input the
password. Tap on Finish. Turn off the +CamHD disconnecting
the power cable and unplug the LAN cable. Reconnect the
power cable and wait a few minutes (in the model +
CamHDMotor7000 LED will flash and then goes off).
ENG
]+at the top right,