Maintenance - Excellent Horos Technische Informationen

6. Any changes in the construction of the radiator and/or warranty repairs can only be conducted
EN
by the Manufacturer.
7. Observe the operating parameters specified in the PRODUCT INFORMATION section.
This applies in particular to:
a. the operating pressure, because excessive pressure can destroy the radiator and bring about
other damages,
b. the quality of the heating medium (wrong pH value or oxygen saturation can cause radiator
corrosion); connecting the radiator to the domestic hot water system or refilling the installation
with liquids having unsuitable chemical properties can also bring about radiator damage.
FAILURE SITUATIONS
In case of any signs of a radiator fault, such as:
• a leak of the heating medium,
• excessive pressure (manifested by deformation of pipes),
• any other abnormal symptoms,
immediately turn off the valves and contact the Manufacturer.

MAINTENANCE

1. Do not allow the temperature of the heating medium to fall below 0°C.
2. We recommend keeping the radiator clean. The radiator can be cleaned with domestic cleaning
products except for those containing solvents or abrasives.
3. Applying any additional layers of paint or lacquer to the radiator is not allowed.
DISPOSAL
When permanently dismantling and removing the radiator observe your local law concerning dispo-
sal.
10