Installation And Wiring; Operation Of The Appliance; Switching The Appliance On And Off - Sanremo SR70 Bedienungsanleitung

Use
This appliance has been designed solely for
grinding coffee beans. Any other use is under-
stood to be improper, and consequently haz-
ardous. The manufacturer cannot be held
responsible for any damage as a result of
improper or incorrect use.
Do not use the appliance for grinding other types
of food, or anything else.
THE COFFEE GRINDERS AND COFFEE GRINDER-
DOSERS MANUFACTURED BY OUR COMPANY
ARE INTENDED FOR SKILLED PERSONNEL ONLY
FOR PROFESSIONAL USE AND NOT FOR HOUSE-
HOLD USE. The user must be an adult. Do not
allow children or incapable persons to use the
appliance.

Installation and wiring

The appliance must be installed by skilled techni-
cal personnel in conformity with the safety rules in
force. Incorrect installation may result in injury of
persons or animals, or damage to property, for
which the manufacturer cannot be held responsi-
ble.
• The appliance must be placed on a stable, flat
surface.
• Before plugging in the appliance, make sure
the voltage and frequency values of the sup-
ply mains correspond to the ratings indicated
on the label featuring the appliance's techni-
cal data.
• The wall socket must be fitted with an effi-
cient earth contact. Consequently, it is essen-
tial to make sure the earth system is efficient
and in conformity with current safety rules. If
in any doubt, have the system thoroughly
checked by per-sonnel with the appropriate
professional skills.
• IT IS COMPULSORY TO EARTH THE APPLIANCE.
• The manufacturer cannot be held responsible in
the event this regulation is not complied with.
• It is essential to make sure the ratings of the
system are suitable for the power absorbed
by the appliance - as indicated on the label
featuring the technical data - and that the wall
socket is protected against over currents.
• Do not use extension cables, plug adapters
for multiple sockets or makeshift connections.
• The motor must rotate clockwise. If the rota-
tion of three-phase motors is to be inverted,
by inverting the two power supply wires
inside the plug, this must be carried out by
skilled personnel.

Operation of the appliance

PRELIMINARIES
Make sure the hopper is positioned correctly on
the appliance and is fastened to the upper grind-
ing blade holder by means of the relevant screw.
Close the locking slide and fill the hopper with cof-
fee beans. Open the locking slide so that the beans
are allowed to drop into the grinding system.
Hopper safety
screw

SWITCHING THE APPLIANCE ON AND OFF

ELECTRONIC GRINDERS/DOSERS
The on-off switch is used to turn the appliance both
on and off.
To switch on: set the switch to "I".
To switch off: set the switch to "O".
GENERAL DESCRIPTION
The control has three buttons for the selection of
the quantity to be ground:
P1: Dose for one coffee
P2: Manual grinding
P3: Dose for two coffees
17