Introduction; Brief Introduction Of The Product; Technical Parameters; Usage - KLARBACH HL31537we Gebrauchsanleitung

11. The heater must not be located immediately below a socket-outlet.
12. There is slight sound when turned on or off, which is normal due to the
material expanding when heated and contract when cooled, please do not
be worried.
13. The used heating element treated by a special way, it has a long using life,
please do not use any other heating element instead of it.
14. Keep combustible material such as furniture, cushions, bedding, paper,
clothes, curtains, etc. At least 100cm away from the heater.
15. Keep the air inlet and outlet free from objects: at least 1 m in front and 50
cm behind the heater.
16. Only connect the fan heater to a single-phase socket with a main voltage as
specified on the rating plate.
17. Do not leave your home while the appliance is in function: ensure that the
switch is in OFF(0) position and the thermostat is in minimum position.
Always unplug the appliance.
18. WARNING: This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when they are occupied
by persons not capable of leaving the room on their own, unless constant
supervision is provided.
(*)Elektrofachmann: anerkannter Kundendienst des Lieferanten oder des
Importeurs, der für derartige Reparaturen zuständig ist. Für eventuelle
Reparaturen wenden Sie sich bitte an diesen Kundendienst (www.ggv-
service.de).
11

Introduction

Please read this guidance carefully before using your fan heater, so that you
­
can use it correctly.
Please keep well with this guidance.
­

Brief Introduction of the product:

The fan heater of these series adopts heating technology of PTC, it has a high
heating efficiency, centralized heat and extensive usage.

Technical parameters:

Model Rated Power Rated Voltage
HL31537we 1500W 220-240V~

Usage:

1. Please check before you use:
A: The heating element and electric wire cannot be broken.
B: Please do not use the socket lower than 10A for fear of any accident.
2. Use the fan heater on the flat place to avoid being toppled.
3. Function for control panel:
1. Connect the power supply, rotate the switch knob.
1.1 "O": Off.
1.2 " ": Fan.
1.3 "I": Low heat.
1.4 "II" High heat.
1.5 " " High heat +Swing
2. there is an adjustable thermostat knob for adjusting heating
temperature.You can rotate the knob to get your desired heating
ENG
Frequency
Class II
50/60Hz
12