Bartscher A100266 Bedienungsanleitung Seite 25

o Insert the plug into an appropriate grounded socket and set the temperature dial to
the highest setting marked "
on for around 30 minutes. A slight odour may be detected, which will quickly
disappear.
o After around 30 minutes, set the temperature dial to the OFF setting marked "
and remove the device's plug from its socket.
o Leave the device to cool for approx. 20 minutes, remove the lid and take out the
ceramic insert.
WARNING! Danger of burns!
Always wear protective kitchen gloves when removing the lid and ceramic insert.
o Empty the ceramic insert, rinse it and dry thoroughly. Replace the ceramic insert in
the outer pot.
o The foodwarmer is now ready for use.
Control panel
Low
OFF setting
Setting the temperature
" " LOW
This setting is for slow heating of food and maintaining the temperature of food.
Liquids do not heat rapidly, and little steam is produced. Dishes do not stick or burn,
and most dishes do not need to be stirred regularly.
- 24 -
" (see "Setting the temperature"). Leave the device
Red control light
High
Auto
Temperature dial
"