Herunterladen Inhalt Inhalt Diese Seite drucken

Belangrijk - Spectral CLOSED Bedienungsanleitung

Inhaltsverzeichnis

Werbung

IMPOrtAnt
Please read these operating instructions carefully and keep them for reference.
Spectral cannot be held liable for any damage resulting from non-compliance with the
following instructions.
Choose a level, dry and clean place for your speakers, away from windows with direct sunlight,
heat sources, vibrations, high humidity and extreme cold.
Never open the housing. Contact your authorized dealer or a qualified repair specialist in
the event of problems or defects.
To prevent damage, your Amplifier-Modul may only be operated with the voltage specified
on the nameplate.
To avoid the risk of fire and the possibility of an electric shock, the Amplifier-Modul may not
be exposed to rain or high air humidity (> 80%). The device complies with the valid EMV
regulations at an ambient temperature of +10°C... +40°C.
Do not use force on the operating elements, connections or cables. Disconnect the mains
cable and connection cables to other equipment before shifting to another place. Always pull
the plugs and not the cables. Never touch the mains cable with wet hands.
To protect the high-level stages of the Amplifier-Modul from overheating, a minimum space
of 5 cm from walls and furniture must be observed when setting up the equipment. Avoid
heat accumulation and do not cover your Amplifier-Modul with curtains, tablecloths etc.
To avoid image interference, ensure that there is sufficient space (min. 1 m) between the
Amplifier-Modul and the TV (tube tVs only). The other components of the CLA1 system
(satellites and central speaker) are magnetically shielded and can be positioned directly next
to the TV set without any problems.
Do not place your Amplifier-Modul close to heat sources or open flames (e.g. candles). Please
disconnect the Amplifier-Modul from the mains when not in use for longer periods, during
thunder storms or in the event of flooding.
Do not place any objects on the Amplifier-Modul housing or bass reflex opening. Oscillations
and vibrations can damage them.
Do not insert any objects or body parts into the Amplifier-Modul opening. Live components
inside the housing could get touched and damaged. This can lead to short circuiting, electric
shocks and fire.
Turn down the volume immediately if sound distortions, such as unnatural knocking, beating
or high-frequency clicking can be heard.
Do not use any chemical solutions to clean the equipment. Use a clean, dry cloth.
If exposed to severe temperature fluctuations, condensation (water drops) can form inside
the Amplifier-Modul. In this case, wait for at least 2 hours until the moisture has evaporated
before putting the equipment into operation.
The batteries in the remote control must be disposed of at a waste battery collection point.
Batteries should be kept out of the reach of children. Batteries must be inserted correctly, as
shown on the polarity label. Only use the battery or rechargeable battery types specified for
this system (LR03 AAA 1.5V). The batteries supplied with the system are not rechargeable,
so please do not attempt to do so.
The mains plug must always be accessible so that it can be removed in an emergency!
Een correct gebruik en dito aansluiten zijn de verantwoordelijkheid van de gebruiker.
Spectral aanvaardt geen enkele aansprakelijkheid door incorrect gebruik.
2

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

CatenaBrickCla1Cta1Cta2Bra1

Inhaltsverzeichnis