Troubleshooting - Blaupunkt BP-GIKLED09 Bedienungsanleitung

BP-GIKLED09
Keep the insect killer working for more than 12 hours at first use.
Do not open the container during use. Make sure the insects are
dried to death to prevent them from escaping.
Keep the insect killer working for 3 hours before going to sleep.
Make sure to keep windows and doors closed.
5.2 How to Use
1.
2.
3.
For best results, turn off other light sources and prevent from
installing the appliance in the draught.

6. Troubleshooting

Appliance does not
Appliance does not
Connect the insect killer to a 5 V power supply. Install the
insect killer in a dry location on a stable and non-slippery
surface.
Select the silent or strong mode. Press the button to start
the insect killer.
Press the same button to stop the insect killer. Disconnect
from the power supply after use.
Problem
start
light
Noisy fan
Reason
Power supply not
connected well
On-off button not
pressed
Power supply not
connected well
Light is damaged
PCB board is
damaged
Foreign objects in
the fan
5
Possible solution
Reconnect the
power supply
Press the on-off
button
Reconnect the
power supply
Light source
cannot be
replaced; scrap the
appliance
PCB Board cannot
be replaced; scrap
the appliance
Clean the fan