Blaupunkt BP-GIKLED09 Bedienungsanleitung Seite 2

BP-GIKLED09
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
All cords and cables should be routed so that they will not be
walked on or pinched by items placed upon or against them.
Pay particular attention to the point where they exit the
unit.
Remove all flammable materials close to the device before
switching on.
Do not install the device on a flammable surface (linoleum,
carpet, wood, paper, cardboard, plastic, etc.).
Protect this device from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers)
that produce heat.
Do not remove the cover under any conditions. There are no
user-serviceable parts inside. Never operate this device
when its cover is removed.
Do not operate a visibly damaged device. Do not attempt to
operate this device if the power cord has been frayed or
broken.
Always mount this device in a safe and stable manner.
Mount this device in an area that will allow proper
ventilation. Allow about 15 cm between this device and a
wall.
This device should only be serviced by qualified service
personnel.
Familiarise yourself with the functions of the device before
actually using it.
Always install the device in a well-ventilated location.
Keep this device away from dust and extreme temperatures.
Make sure the ventilation openings are clear at all times. For
sufficient air circulation, leave at least 2.5 cm in front of the
openings.
Never carry or move the device from the power cord or any
other moving part. Always use the bracket.
In the event of an operating problem, stop using the device
immediately.
Never try to repair the device. There are no user-serviceable
parts inside the device. Refer to an authorized dealer for
service and/or spare parts.
This device is not designed for permanent operation: regular
operation breaks will prolong its live.
2