Technical Specifications - ECG BT 100 Bedienungsanleitung

Using line input (AUX-IN)
• You can connect an audio input of an external device, for example of an MP3 player and enjoy the sound
from the player using the high quality amplifi er of this unit.
• To connect an external device to the AUX connector of this unit, use standard cable with 3.5 mm jack,
which you connect to the headphones or line output of the player.
• Turn on the external device (e. g. MP3 player).
• Connect the cable from the player to the connector AUX on the rear of the device. This way, you would
turn off the Bluetooth© function and activate the external input AUX.
• Start playback on the external device and set the volume of the device to required level.
• Do not forget to disconnect the cable from the AUX connector after you fi nish the playback from the
external device to switch the unit back to the Bluetooth© mode.

TECHNICAL SPECIFICATIONS

Power:
Charging
Input sensitivity AUX
The name Bluetooth© and associated logos are registered trademarks owned by Bluetooth SIG, Inc. Any
use of such trademark is under license. Any other trademarks and trade names are the property of their
respective owners.
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into
plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent
negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the
product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
Changes in text and technical parameters reserved.
EN
20
Plugging the connector in you switch
to AUX mode
Built-in lithium battery 3.7 V / 1000 mA
USB, 5 V / min. 500 mA
800 mV
Disconnecting the connector, you
switch back to the Bluetooth© mode
08/05