Epson SureLab D-3000 Benutzerhandbuch Seite 7

SecureDtheDheadDcleaningDmat.
E
1. Use your finger to press the head cleaning mat in place.
2. Run your finger along the head cleaning mat to press it securely in place.
Note:
• Press the sticky side of the head cleaning mat to secure it to the printing mount. If you
perform operations when the head cleaning mat is not fixed securely in place, the print
head could be damaged.
• Check that there are no gaps between the head cleaning mat and the printing mount. If
there are any gaps, remove the head cleaning mat and then place it again so that there
are no gaps.
- PRINTHEADDMAINTENANCEDKIT
7
-
EN