Before The First Use; Preparation For Use; Operating The Device - Goclever HHAFRYER Schnellstartanleitung

-Do not connect the device or operate the control panel with wet hands.
-Do not place the device on a wall or on other devices. Leave at least 10 cm of free
space at the back and the sides, and 10 cm of free space above the device.
-Do not place anything on the device.
-Do not use the device for any purpose other than those described in this manual.
-Do not let the device operate without supervision.
-When frying with hot air, hot steam is released through the air outlets. Keep your hands
and your face at a safe distance from steam and the air outlets.
Also, watch out for hot steam and air when removing the frying pan from the device.
- All available surfaces can get hot during operation (Fig.2)
- If dark smoke escapes from the device, disconnect the device immediately from its
power supply.
-Make sure that the device is placed on a horizontal, even and stable surface.
-This device is intended only for domestic use. It may not be suitable for safe use in
such environments as company kitchens, farms, motels, and other residential environ-
ments. Also, it is not intended for use by customers in hotels, motels, hostels, and at
breakfasts, and in other residential environments.
-If the device is used improperly or for commercial or semi-commercial purposes, or not
in line with the instructions in the operation manual, the warranty becomes invalid, and
the manufacturer may waive any responsibility for the resulting damages.
-Always disconnect the device from its power supply when it is not in use.
-The device needs approximately 30 minutes to cool down for safe servicing or clean-
ing.

BEFORE THE FIRST USE

1. Remove all packaging elements.
2. Remove the foil and stickers from the device.
3. Thoroughly clear the basket and the frying pan with hot water, with a dish washing
liquid, and a non-scratch sponge.
4. Wipe the device with a damp cloth.
Our device is a fryer, which makes it possible to prepare dishes by means of hot air
without oil.
Remember: Do not fill the pan with oil or grease for frying.

PREPARATION FOR USE

1. Place the device on a stable, horizontal, and even surface.
Do not place the device on a surface that is not resistant to high- temperature
2. Place the basket in a bowl (Fig. 3).
3. Take the cable out of the chamber, which is located at the bottom of the device.
Do not fill the pan with oil or other liquid.
Do not put anything on the device, air flow will be disturbed, and will affect the hot air
frying effect.

OPERATING THE DEVICE

1. Connect the mains plug to an earthed electrical socket.
2. Pull out carefully the frying pan with the bin from the device.
3. Fill the basket with dishes
4. Insert the bowl with the basket back into the device (Fig. 4)
Never use the bowl without the basket.