Using The Function Keys - Klarstein Arabica Bedienungsanleitung

• For slightly dry bread, use a lower light/dark setting than normal.
• For fresh bread or whole wheat, use a higher setting than normal.
• Breads with very uneven surfaces (such as English muffins) will require a higher
light/dark setting.
• Thickly cut pieces of bread will take longer to toast, sometimes significantly longer,
since more moisture must be evaporated from the bread before toasting can occur.
• Very thick pieces breads maybe toast two cycles.
• When toasting raisin or other fruit breads, remove any loose raisins from the surface
of the bread before inserting into the toaster. This will help prevent pieces from
falling into the toaster or sticking on the guard metal part in the slot.
• Single slice toasting: If you are toasting as single slice of bread, set the light/dark
selector lighter than normal. The toaster is designed to heat the whole toasting
chamber for two slices. By reducing the toasting time for a single slice, it will not be
toasted too darker.
• Frozen breads: Frozen waffles, pancakes and French toast should be warmed using
the defrost button.
Note: When toasting filled pastries, the filling can become very hot. Be careful not to
burn yourself.

USING THE FUNCTION KEYS

Defrost button
The defrost function is designed so that the bread is first defrosted and then toasted,
which extends the roasting time slightly.
1 Place slices of bread in the bread slots.
2 Connect the toaster. Push the toaster lever down until it clicks into place. The Cancel
and Light/Dark indicators light up and the display shows the set level of browning
(default is 3). The toaster starts. Now select the defrost function and the defrost
indicator lights up.
3 Press the light/dark button and select the desired level.
• Level 1-2: For chilled bread and thinner frozen items such as frozen pancakes.
• Level 3-4: For pastries, frozen waffles and thin French toast.
• Level 5-7: For thicker frozen pastries, hand sliced bread and thick French toast.
4 The toast is automatically ejected when the roasting process is complete.
5 The roasting process can be stopped at any time by pressing the abort button.
EN
15