Manually Set Clock; Temperature And Humidity; Mold Alert - Oregon Scientific +ECO series Bedienungsanleitung

RMR500ESU:
UK: MSF-60 signal: within 1 500 km (932 miles) of Anthorn,
England.
RMR500ESA:
WWVB-60 signal: within 3200 km (2000 miles) of Fort
Collins, Colorado.
To enable / disable clock signal reception:
Press and hold to enable or
reception.
NOTE
Reception takes 2-10 minutes. If the signal is weak,
it can take up to 24 hours to get a valid signal. If signal
reception is unsuccessful, place your unit next to a window,
press and hold to force another signal search.
Clock signal reception indicator:
STRONG SIGNAL

MANUALLY SET CLOCk

To set the clock manually, disable the clock signal reception
first.
. Press and hold .
to disable clock signal
WEAk / NO SIGNAL
2. Press or to change the settings. The settings
order is: time zone, 12/24 hr format, hour, minute, year,
calendar mode (month – day / day – month), month and
day.
3. Press to confirm.
RMR500ES / RMR500ESU: Time zone sets the clock +/-
23 hours from the received clock signal time. If you have
deactivated the clock signal reception, do not set a value
for time zone.
RMR500ESA: Select the time zone: (0) Pacific, (+1)
Mountain, (+2) Central or (+3) Eastern.

TEMPERATURE AND HUMIDITY

To toggle temperature unit:
Press °C / °F.
NOTE
"HH. " or "LL. " will be displayed when the received
H L
temperature is out of the specified temperature range.

MOLD ALERT

This product features moisture alert function for the
prevention of mold. If the humidity is over 60%, the mold
alert icon will flash, and will stop flashing if the humidity
is less than 60%.
7