Remote Sensor - Thgr22N; Getting Started; Solar Panel - Oregon Scientific +ECO series Bedienungsanleitung

REMOTE SENSOR - THGR122N (FIG 5)
1
2
. LCD display
2. LED status indicator
3. Wall mount hole
4. RESET hole
5. CHANNEL switch
6. Battery compartment

GETTING STARTED

SOLAR PANEL

This product uses a 600mAH rechargeable battery which
should be charged via the solar panel. For the battery's first
charge, it is strongly advised to charge it for at least 12 hours
by lifting and positioning the solar panel in such a way that it
faces sunlight directly.
IMPORTANT
The solar panel should be lifted and
positioned at no more than 90°.
3
4
5
6
When the rechargeable battery is nearly flat, the LED
indicator on the main unit and
panel directly to sunlight for approximately 5 to 6 hours to
charge the battery. Normally, the battery life will last for 2
months.
TIPS
• For best results when charging the battery, avoid
placing the product behind glass windows, but expose
the solar panel directly to sunlight.
• Do not scratch the solar panel's surface or wipe it with
strong detergent.
• Do not expose the solar panel to rain, snow or
moisture.
4
600mAH
rechargeable
battery
will flash. Expose the solar