icon Audio MV8802 Handbuch Seite 28

Main Crown
0 1 2 3
Position 0:
crown screwed
Position 1, winding:
crown unscrewed, ready for
winding
Position 2, date:
crown extracted, ready to set
the date
Position 3, time:
crown extracted, ready to set
the time
26
Setting the MAIN dial and winding
Unscrew the Main Crown by turning it anti-clockwise from
position 0 to position 1 without pulling it.
1) Winding: with the Main Crown in position 1, wind manually by
turning the Main Crown clockwise until you feel little resistance.
After this, the mechanism will be automatically wound by wrist
movements spinning the rotor on its axis. The watch will stop if not
worn for long intervals.
2) Date: gently pull out the Main Crown to position 2 and turn it
anti-clockwise in order to quickly set the date. Do not change the
date between 8pm and 4am. The date also changes when the hour
hand goes past midnight.
3) Time: gently pull out the Main Crown to position 3. The second
hand will stop moving. Then turn the Main Crown anti-clockwise
in order to set the time (hour and minute hands move forward).
Always move the hands forward when setting the time. If the hands
are accidentally moved backward, then always move them forward
advancing them (of) at least 30 minutes on the dial- before finishing
setting the time. For better accuracy, always position the minute
hand 1 minute ahead the time you wish to set.
When finished setting the time/date, gently push the Main Crown
back to position 1 and then gently push and screw it in completely
into position 0.