Fitting Instructions - MO-EL 715 Gebrauch Und Wartung

9. Keep connections dry.
10. If the power supply cord is damaged avoid to use it. Let the
Manufacturer, or the After Sale Service, or some similar qualified
person replace it, in order to avoid any risk.
11. Disconnect the appliance from the supply line, if you don't use it
for a long time.
12. Always unplug the appliance before doing any maintenance op-
eration.
13. Periodically verify the integrity of the appliance. If defects are
found, do not use it; call an Authorized After Sale Service.
14. In case of malfunction or fault, call an Authorized After Sale
Service, and request original spare parts.
In case of steady connection to the wire, a bipolar circuit
breaker with contact opening distance of at least 3 mm must
be fitted upstream from the supply line.
This hand dryer must be installed out of the range of a person
using the bath or the shower.
Disconnect the appliance from the power supply when not
used.
For safety reasons, never attach the device above bath tubs, wash
basins, showers, or other fittings where there may be water.
FEATURES
The mod. 715 (with plastic shell) and the mod. 716 (with metal shell)
electronic hand dryers have a double protection device in the heating
element, that makes the machine stop automatically after 60 sec-
onds of continued work. The main features of the appliances are high
power, easy installation and use, safety and reliability.

FITTING INSTRUCTIONS

This appliance is intended for indoor use only
The hands dryers have been specifically designed for vertical
attachment on the wall with the air outlet toward the bottom.
Make sure that the wall where you plan to mount the appli-
ance is solid and free of electrical cables or water pipes inside.
6