Genius DVR-FHD570 Bedienungsanleitung Seite 11

Function Setting
9. Date/Time: Y/M/D H/M/S
Press Rec/Snap button to enter date and time setting, then press Up/Down button to adjust the
date and time, press Rec/Snap button to enter next setting and confirm the setting by pressing
the Rec/Snap button.
10. Language: Press Up/Down button to select the language and confirm the setting by pressing
the Rec/Snap button.
11. Frequency: 50Hz/60Hz
12. Default Setting: YES/NO. If you select YES, it will reset to factory-default settings.
13. Version: Show software version number.
NOTE
1.
DVR will continue to loop when recording is 2/5/10minutes as the storage time. When the
memory card is full, it will record from the beginning and erase over the previously recorded files
automatically. If you turn it off, or when the memory card is full, it shows CARD FULL and stops
recording.
2.
When you press the Rec/Snap button but it won't stop recording manually, check if the Motion
Detection is ON. If yes, turn it OFF.
-10-
English