Charging When Battery Is Installed In Vehicle - hc-cargo 161026 Bedienungsanleitung

CHARGING WHEN BATTERY IS INSTALLED IN VEHICLE

1. Position the AC and DC cables to reduce the risk of damage by the hood, door and moving or hot
engine parts.
NOTE that if it is necessary to close the hood during the charging process, ensure that the hood
does not touch the metal part of the battery clips or cut the insulation of the cables.
2. Stay clear of fan blades, belts, pulleys and other parts that can cause injury.
3. Determine which post of the battery is grounded (connected) to the chassis. If the negative post
is grounded to the chassis (as in most vehicles), see step to negative-grounded vehicle. If the
positive post is grounded to the chassis, see step to positive-grounded vehicle.
FOR A NEGATIVE-GROUNDED VEHICLE
Connect the POSITIVE (red) clip from the battery charger to the POSITIVE (POS, +) ungrounded post
of the battery. Connect the NEGATIVE (black) clip to the vehicle chassis or engine block away from
the battery. Do not connect the clip to the vehicle chassis or engine block sheet-metal body parts.
Connect to a heavy gauge metal part of the frame or engine block.
FOR A POSITIVE-GROUNDED VEHICLE
Connect the NEGATIVE (black) clip from the battery charger to the NEGATIVE (NEG, -) ungrounded
post of the battery. Connect the POSITIVE (red) clip to the vehicle chassis or engine block away from
the battery. Do not connect the clip to the carburetor, fuel lines or sheet-metal body parts. Connect
to a heavy gauge metal part of the frame or engine block.
Connect the AC supply cord to the electrical outlet for processing the charging.
CHARGING WHEN BATTERY IS OUTSIDE VEHICLE
1. Connect the POSITIVE (red) charger clip to the POSITIVE (POS, +) post of the battery.
2. Connect the NEGATIVE (black) charger clip to the NEGATIVE (NEG, -) post of the battery.
3. Connect the AC supply cord to the electrical outlet.
4. When disconnecting the charger, always do so in the reverse order of the connecting procedure
and break the first connection while as far away from the battery as practical.
NOTE that a marine battery must be removed and charged on shore. To charge it onboard requires
equipment specially designed for marine use.
AC CONNECTIONS
1. The plug must be plugged into an outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
2. The plug pins must fit the receptacles. Do not use with an ungrounded system.
3. Never alter AC cord or plug provided. If it does not fit the outlet, have prosper grounded outlet
installed by a qualified electrician. Improper connection can result in a risk of an electric shock or
electrocution.
5
161026
Vedpak 196_Version 1_18.07.14