Cleaning The Filter; Replacing The Filter - avidsen Clair-M1 Bedienungsanleitung

3- CLEANING THE FILTER

Note
Disconnect the power supply before cleaning by unplugging the mains adaptor and check that the ventilation has stopped. Risk of injury or electric
shock if the filter is changed while the purifier is still running.
We do not recommend cleaning the filter with water as it may reduce the purifier's performance and affect its filtering ability.
1. Disconnect the purifier's power supply and unplug the mains adaptor.
2. Place the purifier on its side, with the Avidsen logo facing down.
3. Hold the purifier by its handle and remove the upper white side to access the filter. The side is attached using two magnets.
4. Remove dust from the surface of the e2f filter using a vacuum cleaner.

4 - REPLACING THE FILTER

Filters have a maximum lifespan of 12 months, which may be reduced depending on the filter's location and the room in which it is used.
Note
Disconnect the power supply before changing the filter by unplugging the mains adaptor and check that the ventilation has stopped. Risk of injury
or electric shock if the filter is changed while the purifier is still running.
1. Place the purifier on its side, with the Avidsen logo facing down.
2. Hold the purifier by its handle and remove the upper white side to access the filter.
3. Replace it with a new, clean filter.
5 EN