Practice Safe Sound; What's In The Box; Tools Of The Trade; Installation - Orion HCCA COMPETITION HCCA52 Bedienungsanleitung

PRaCTICe safe sounD™

Continuous exposure to sound pressure levels over 100db may cause permanent hearing loss .
High powered automotive sound systems can generate sound pressure levels in excess of 130db .
When playing your system at high levels, please use hearing protection and prevent long term
exposure .

What's In The Box

Included in this box are all the necessary mounting hardware and cables for your basic
installation . listed below is a detailed list of the components included in this system package .

Tools Of The Trade

listed are the majority of the tools required to perform the installation . Having the proper tools
will make the installation much easier . It is very difficult when you get half way through the
installation and discover that you require a specific tool to get yourself through a particular part
of the installation . some of these tools are necessities . some make the job much easier .

InsTallaTIon

The performance of the HCCa Component loudspeaker is directly proportional to the quality of
installation . Care taken during the installation process will be rewarded with years of satisfying
performance . If you are unsure about your installation capabilities, please refer to your local
authorized orion Dealer for technical assistance . orion dealers are trained professionals
dedicated to extracting the maximum performance out of your orion system . If you decide to
install this speaker system yourself, please read the entire installation section before starting
your installation .
2
Model number:
Date of Purchase:
Quantity
1
2
2
2
2
2
4
4
1
2
o Marking Pen
o 1/4" Drill bit
o 1/8" Drill bit
o 3/8" Drill bit
o Hole saw arbor
o Wire Crimpers
o 5-5/8" Hole saw (6-1/2" woofer install .)
o 4-3/4" Hole saw (5-1/4" mid/woofer install .)
o 2" or 2-1/8" Hole saw (for flush mount tweeter installation .)
Description
owner's Manual
HCCa Tweeter elements
surface mount hardware
flush mount hardware
HCCa mid/woofer
Passive crossovers
Cables (speakers to crossover)
Cables (crossover to amplifier)
Mounting template
Grilles
Mounting screws
o electric Drill
o Phillips screwdriver
o Volt/ohm Meter (optional)
o needle nose Pliers
o assorted Tin snips
o Wire strippers
© 2012 MD Audio Engineering—all rights reserved