Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
Hair Dryer Use instructions
USE
With the air speed selector (5), you can set the power of the airflow as needed.
Settings.
0: turned off
1: medium airflow, for a delicate drying of the fine and slightly wet hair.
2: stronger airflow, for a faster drying
With temperature selector (6) it is possible to set the airflow temperature.
1: low temperature
2: medium temperature
3: high temperature
Cold air button
Allow to fix the hairstyle without desiccating hair. Pressing this button, the cold airflow button will
stop.
CONCENTRATOR
With the concentrator, the airflow works on accurate areas, to get easily the desired hairstyle.
This accessories allow to concentrate directly the airflow on the locks, for an easy hairstyle. Put the
concentrator on the hair.
DIFFUSER
Put the diffuser on the hair dryer. Projected to dry more delicately thanks to the airflow generated,
the diffuser is ideal for the smooth, buckled or undulated hair
Attention: the diffuser is hot when using it.
Cleaning the airflow grid
Remove the grid anticlockwise, if necessary, clean the airflow grid with a wet cloth.
Hook When complete, you can hang the hairdryer with the hook.
CLEANING
The appliance can be cleaned with a soft cloth lightly wet with hot water. Before cleaning the ap-
pliance, unplug it from the socket. Do not clean with thinners, detergents or similar, that could da-
mage the appliance.
Do not introduce liquids into the hair dryer in order to not damage the appliance.
Il is recommended to clean regularly the filter from hair and dust.

TECHNICAL DATA

Power: 2000W
Power supply: 220-240V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis