Olive O3HD Kurzanleitung Seite 6

1. CONNECTING TO YOUR NETWORK
Your Olive HD music server can be connected wirelessly
or wired to your router.
WIRELESS: Attach the WiFi antenna that came with
your Olive 4HD to the main connector marked “"WiFi
1”". This antenna should be positioned upright for best
performance. We recommend to attach additional WiFi
antennas to the connector “"WiFi 2”" in case the reception
is not optimal. For best performance please use WiFi
antennas that are on a wire and can be positioned
 exibly (WiFi antennas must have a SMA Connector).
Note: The Olive O3HD has no built-in WiFi connection.
WIRED: If you have a wired connection please use the
Ethernet Connector for connection to your router.
For more information about connecting to your network
please refer to page 10.
2. CONNECTING TO YOUR
Connect the Analog or Digital outputs to the
corresponding inputs on your receiver. The Olive O3HD
only comes with analog outputs.
3. CONNECTING TO YOUR TV:
be connected via HDMI to your TV. It replicates the user
interface that you would otherwise see on the LCD of
the Olive O4HD.
To switch between the LCD and the TV
interface simply press both the LEFT and RIGHT navigation
buttons shortly (page 8).
AMPLIFIER/RECEIVER:
The Olive O4HD can
4. OTHER CONNECTIVITY
USB: To backup and restore your music library (page
16-17).
DIGITAL INPUT: Connect the digital audio output of
an additional source (e.g. TV) to take advantage of the
high-resolution DAC of the Olive O4HD. To switch to the
source simply go to SOURCES in the main menu and
select DIGITAL INPUT.
IR INPUT: For connecting an external IR Receiver in
case the Olive O4HD is inside a cabinet.
5. STARTING UP YOUR OLIVE O3HD & O4HD:
the Power Cord to the Power Connector and to the
power outlet on your wall. Turn on the Power Switch and
your Olive HD Music Server will start up. Booting to the
Startup Screen usually takes between 30-45 seconds.
O L I V E 0 3 H D & 0 4 H D Q U I C K S T A R T G U I D E
Connect
7