Restore; Tips & Tricks; Handling & Care - Olive O3HD Kurzanleitung

8.4 Restore

The restore process will erase all music on your Olive HD
Music Server and will overwrite it with the music from
your backup. Go to SETTINGS > SYSTEM SERVICES
and select RESTORE. Follow the on-screen instructions
and connect the USB hard drive only when prompted.
A pop-up window will con rm when the restore has
started.
Never unplug the USB hard drive during
CAUTION
backup or restore. It can damage your Olive HD Music
Server and erase your music. Turn off your Olive HD
Music Server (Power Switch on backside) when the
process is complete and disconnect the USB hard drive.
The backup and restore process can take several hours
depending on the capacity of your Olive HD Music Server. We
therefore, recommend that you perform it overnight.
the backup and restore process your Olive HD Music Server
cannot perform any other operations.
8.5 Care & Handling
TURN OFF OTHER STEREO COMPONENTS BEFORE
switching off the Master Power Switch on your Olive
HD Music Server. Turn down ampli er/receiver volume
before pressing the Sleep/Wake Button to avoid a
volume surge that could impact other components.
WHEN PLANNING NOT TO USE YOUR OLIVE
periods of time (e.g. vacation, etc.) disconnect the Power
Cable from the wall outlet. Always grab the plug, never
the cable itself.
NEVER PUSH OBJECTS
openings. Never spill liquid of any kind on the product.
Contact Olive support if something drops into the case.
DO NOT CLEAN YOUR OLIVE WITH
chemical solvents, alcohol or abrasives. Do not remove
dust with air pressure.
8.6 Tips & Tricks
IS YOUR OLIVE NOT RESPONDING?
arrow button pressed. It should unfreeze the navigation.
If this does not work, press and hold the Sleep/Wake
Button on the front for about 5 seconds. The system
will restart. Allow 40-60 seconds for the main menu to
reappear and for network connections to re-establish.
During
If this happens regularly please contact us.
THE TV INTERFACE DOES NOT WORK.
have updated your Olive O4HD software to the latest
version. Also check if your TV is set to a manual
resolution of 480P and automatic scaling is switched
off. Try connecting the Olive O4HD to another HDMI
connector on your TV and make sure the correct source
is selected.
TOUCHSCREEN NOT RESPONDING?
touchscreen under SETTINGS > SYSTEM SERVICES
for long
> CALIBRATE TOUCHSCREEN. Use a stylus pen for
accuracy.
Visit us online at www.olivehi .com for a complete list of FAQs
or email us at support@olivehi .com if you cannot  nd an
answer to your question.
of any kind through the product
aerosol sprays,
Please keep the Left
O L I V E 0 3 H D & 0 4 H D Q U I C K S T A R T G U I D E
Make sure you
Please calibrate the
17