Wi-Fi; Add A Wi-Fi Network - Hisense Sero 8 Pro Benutzerhandbuch

Headphones can be connected to the Sero 8 pro's headphone port. For more information
about headphones, see
NOTE
If you use the microphone function that comes with headphones, choose the 3.5mm
4-Conductor Headset.

Wi-Fi

You can connect to a wireless access point, or hotspot to use Wi-Fi. Some hotspots are open
and you can simply connect to them. Others implement security features that require other
steps to set up.

Add a Wi-Fi Network

You can add a Wi-Fi network so your device will remember it, along with any security
credentials, and connect to it automatically when it's in range. You must also add a Wi-Fi
network if the network does not broadcast its name (SSID), or to add a Wi-Fi network when
you are out of range.
1. Turn on Wi-Fi, if it's not already on.
2. Tap the Plus icon
3. Enter the SSID (name) of the network. If necessary, enter security or other network
configuration details.
4. Tap Save.
Forget a Wi-Fi Network
To forget a Wi-Fi network, go to
name] > Forget.
Advanced Wi-Fi Settings
To set the Advanced Wi-Fi, go to
Advanced .
Network notification -
bar when your device detects an open Wi-Fi network. Uncheck this option to turn off
notification.
Keep Wi-Fi on during sleep -
it's connected to Wi-Fi.
Scanning always available -
Avoid poor connections -
quality or unreliable Internet connection.
Important Safety Instructions on page
at the top of the screen.
Settings > WIRELESS & NETWORKS > Wi-Fi > [the network
Settings > WIRELESS & NETWORKS > Wi-Fi > Menu icon >
By default, when Wi-Fi is on, you receive notification in the Status
To select whether to put the Sero 8 pro in sleep mode when
Check to scan for networks even when Wi-Fi is turned off.
Check the box to automatically avoid using networks with a low-
27.
Making Connections 13