Configuring The Parrot Conference - Parrot CONFERENCE Bedienungsanleitung

• settings: this menu provides access to several submenus.
- Contacts management: this submenu is used to manage the public and private
phonebooks on your device. For further information, refer to the section entitled
«Managing Phonebooks and Contacts».
- Paired device: lists the bluetooth devices paired with your Parrot
CONFERENCE. by selecting one of these phones, you can manually connect or
disconnect it from your device. you can also delete it from your device's memory.
- Pair devices: this submenu takes you to a special pairing mode.
For further information, refer to the section entitled «Configuring the Parrot
CONFERENCE».
- language: select the language.
- Display: this submenu allows you to adjust the backlight, the phonebook zoom,
the menu colour and the welcome screen of the Parrot CONFERENCE.
- sound: this submenu lets you adjust the call volume and select a pre-recorded
ringtone.
- Restore default value: reconfigures the Parrot CONFERENCE with its factory
settings (but does not delete the list of paired devices, nor the public and private
phonebooks).
- software update: enable this option before updating via bluetooth
( www.parrot.com , Download section). Doing so will increase the number of
devices compatible with your Parrot CONFERENCE.
- Information: this submenu provides information on the software built into
the Parrot CONFERENCE. It also lets you change the name displayed by the
Parrot CONFERENCE when searching for devices (allocation of a number).
The Parrot CONFERENCE allows you to manage several calls. This menu is only available
when a call is in progress on the device. simply press the scroll wheel to call up the
«MultiParti Call» menu. This menu gives you the following possibilities:
• switch call: changes the active call with the call initially on hold.
• hangup held call: ends all calls on hold.
• Dial new call: allows you to make a new call.
• Private phonebook: provides access to all the contacts in the private phonebook.
• Public phonebook: provides access to all the contacts in the public phonebook.
Note : the use of thIs feature dePeNds oN your PhoNe aNd your oPerator.
refer to the suPPort headINg oN


Configuring the Parrot CONFERENCE

Prior to using your Parrot CONFERENCE with your phone for the very first time, you must
initially pair the two devices. This procedure allows both devices to exchange information in
order to configure a bluetooth connection.
Pairing YOur PhOne with the ParrOt cOnference:
• Using the magic keys:
• Ensure that the bluetooth feature on your phone is enabled (refer to your phone's user
guide or visit the support heading on our website at
• Press one of the magic keys on the Parrot CONFERENCE.
• The Parrot CONFERENCE displays the list of nearby bluetooth devices that can be
connected. If your device is not available, select the «More devices» option on the
Parrot CONFERENCE.
• select your phone and then confirm.
• select the pairing mode corresponding to your phone's model. If your phone's model
is not displayed, select the «Default» option.
• A PIN code is then displayed on the Parrot CONFERENCE screen.
• On your bluetooth phone, enter the PIN code displayed on the Parrot CONFERENCE
screen.
• Using the Devices menu:
• Ensure that the bluetooth feature on your phone is enabled (refer to your phone's user
guide or visit the support heading on our website at
• Turn the scroll wheel until the «Devices» menu is displayed and then select it.
• The Parrot CONFERENCE displays the list of nearby bluetooth devices that can be
connected. If your device is not available, select the «More devices» option on the
Parrot CONFERENCE.
• select your phone and then confirm.
• select the pairing mode corresponding to your phone's model.
If your phone's model is not displayed, select the «Default» option.
www.parrot.com ).
www.parrot.com ).