Menu Structure; Configuring The Parrot Conference - Parrot CONFERENCE Bedienungsanleitung

Menu Structure

• Scrolling through the menus: :
- Turn the central scroll wheel to access the menus.
The kit displays the «Public phonebook» menu.
- browse through the menus by turning the wheel and confirm with the green button
or by pressing the scroll wheel.
- To exit the menu, press the red button or wait a few seconds.
• Menu structure :
when using the Parrot CONFERENCE with the Parrot PhONE bAsE, the following menus
are available.
- Public phonebook: this menu contains the contacts that are available to all Parrot
CONFERENCE users. you must first send the contacts to the Parrot CONFERENCE
by bluetooth (refer to the section entitled «Managing Phonebooks and Contacts»
in the «using a bluetooth Phone» chapter).
- Devices (detected): displays the list of devices paired with the Parrot CONFERENCE
(greyed out if missing) as well as the list of bluetooth devices detected nearby.
Refer to the section entitled «Configuring the Parrot CONFERENCE» to configure a
bluetooth connection between your Parrot CONFERENCE and your bluetooth phone base.
- settings: this menu provides access to several submenus
- Contacts management: this submenu is used to manage the public phonebook
on your device. For further information, refer to the section entitled «Managing
Phonebooks and Contacts» in the «using a bluetooth Phone» chapter.
- Paired devices: this submenu displays the list of bluetooth devices paired with
your Parrot CONFERENCE. by selecting your bluetooth phone base, you can
manually connect or disconnect it. you can also delete it from your device's memory.
- Pair device: this submenu allows you to select a specific pairing menu in order
to configure the bluetooth connection between your Parrot CONFERENCE
and your phone base.
- language: select the language.
- Display: this submenu allows you to adjust the backlight, the phonebook zoom,
the menu colour and the welcome screen of the Parrot CONFERENCE.
- sound: this submenu lets you adjust the call volume and select one
of the pre-recorded ringtones.
- Restore default value: reconfigures the Parrot CONFERENCE with its
factory settings (but does not delete the list of paired devices, nor the public
and private phonebooks).
1
- software update (by bluetooth): enable this option before updating via bluetooth
( www.parrot.com , Download section). Doing so will increase the number
of devices compatible with your Parrot CONFERENCE.
- Information: this submenu provides information on the software built into
the Parrot CONFERENCE.

Configuring the Parrot CONFERENCE

Prior to using your Parrot CONFERENCE with the Parrot PhONE bAsE for the very first time,
you must initially pair the two devices. This procedure allows both devices to exchange
information in order to configure a bluetooth connection. If you have not paired the devices,
the orange and blue lEDs on the phone base flash.
Jumelage de la baSe de téléPhOne
avec le ParrOt cOnference:
hold down the «Mode» button on the phone base for five seconds and then release.
- Press one of the magic keys on the Parrot CONFERENCE.
- The list of bluetooth devices that are used and can be used with
the Parrot CONFERENCE is displayed.
- select your Parrot PhONE bAsE in the list. If it has not been detected, select the «More
devices» option at the bottom of the list. Once your Parrot PhONE bAsE has been
detected, select it.
- A new menu appears; select the «Default» option.
The Parrot CONFERENCE will update its screen by informing you that a connection has
been established between both devices. Once paired, both devices connect automatically.