Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Timer Magicus
Key
MENU
+/>>
-/<<
MANUAL
OK
CTD/COUNTDOWN start the countdown function
RESET/R
* For the first use please press the RESET button key!
Specifications of the timer:
+ It is provided with a buffer battery
+ Daily and weekly programmable
+ In a week the timer can be programmed for 16 different start-up and start-off (8 start-up and 8 start-off).
1. Setting the clock
1.1 Press MENU key at clock display,
1.2 Press OK key, MO will flash and start to set current time, use +/- key to adjust right weekday or
weekend.
1.3 Press OK key to confirm and hour will flash, use +/- to adjust hour. Make sure AM/PM is correct-
ly set.
1.4 Press OK key to confirm and minute now flashes, use +/- key to adjust minute.
1.5 Press OK key to confirm.
2. Setting the programs
2.1 Press MENU key at clock display till
for each day of the week.
2.2 Press MENU key till the screen shows, 1ON display on the LCD.
2.3 Press OK key to start setting. MO, TU till SU will flash, at this stage, use +/- key to adjust day or
days you want. Weekday only or. weekend only is also possible.
2.4 Press OK key to confirm and hour will be flashing, use +/- to adjust hour, check if AM / PM is set
correctly.
2.5 Press OK key to confirm and minute will flash, use +/- to adjust minute.
2.6 Press OK key to confirm and PROG 1ON is now correctly set.
2.7 Press MENU key and the screen will show 1OFF .
2.8 Press OK key to start setting PROG 1OFF. Follow the steps 2.3 to 2.6.
2.9 To have more programs set, repeat the above steps.
2.10 When finish programs setting. press MENU key to quit or hold MENU key for 2 or more seconds
at any stage to go back to clock display format. If no key is pushed within 1 minute, the clock
will be displayed.
2.11 To edit a particular program, locate it using MENU key and press OK key to edit it.
2.12 To remove a particular program, locate it using MENU key, then press OK key and set the day
to -:-- using +/- key.
3. Operating modes of the timer
Press MANUAL key at clock display to select desired operating mode of the timer:
+ OFF: output is cut off and the programs are deactivated.
+ ON: output is constantly and the programs are deactivated.
+ AUTO OFF/AUTO ON: the timer runs in accordance with the programs previously set. The code of
the ongoing program is shown in the screen . OFF indicates that there is no output and ON indicates
that there is output in the outlet.
8
Function
shift between CLOCK and PROGRAM modes
increase the number by 1 or hold to roll fast
decrease the number by 1 or hold to roll
fast
shift between OFF/AUTO OFF/ON/AUTO
ON modes
confirm the current setting
reset the timer and clear all data
previously setting
CLOCK
will display on upper right corner.
is shown on the screen. Up to 9 programs can be set
CLOCK
eng
View of LCD
CLOCK
MO
12:00
PROG
AM
OFF
_
R
+
Werbung
