Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.
Programming timer
View of LCD:
Function of
key:
Taste
MENU
+/>>
-/<<
MANUAL
OK
8.
CTD/COUNTDOWN
Settings
RESET/R
View of LCD:
Specifications of the timer:
+ It is provided with a buffer battery
+ Daily and weekly programmable
+ In a week the timer can be programmed for 16 different start-up and start-off (8 start-up and 8 start-off).
Function of
key:
Taste
1.
Setting the clock
MENU
1.1
Press MENU key at clock display,
+/>>
1.2
Press OK key, MO will flash and start to set current time, use +/- key to adjust right
-/<<
weekday or weekend.
INTENSITY
MANUAL
1.3
Press OK key to confirm and hour will flash, use +/- to adjust hour. Make sure AM/PM
OK
is correctly set.
CTD/COUNTDOWN
1.4
Press OK key to confirm and minute now flashes, use +/- key to adjust minute.
RESET/R
1.5
Press OK key to confirm.
3x
5
6
4
7
2.
Setting the programs
3
Press MENU key at clock display till
2.1
8
2
can be set for each day of the week.
Specifications of the timer:
9
Press MENU key till the screen shows, 1 ON display on the LCD.
+ It is provided with a buffer battery
2.2
1
+ Daily and weekly programmable
2.3
Press OK key to start setting. MO, TU till SU will flash, at this stage, use +/- key to
10
+ In a week the timer can be programmed for 16 different start-up and start-off (8 start-up and 8 start-off).
adjust day or days you want. Weekday only or. weekend only is also possible.
2.4
Press OK key to confirm and hour will be flashing, use +/- to adjust hour, check if AM /
1.
Setting the clock
PM is set correctly.
1.1
Press MENU key at clock display,
2.5
Press OK key to confirm and minute will flash, use +/- to adjust minute.
1.2
Press OK key, MO will flash and start to set current time, use +/- key to adjust right
Press OK key to confirm and PROG 1 ON is now correctly set.
2.6
weekday or weekend.
Press MENU key and the screen will show 1 OFF .
COLOR
2.7
1.3
Press OK key to confirm and hour will flash, use +/- to adjust hour. Make sure AM/PM
Press OK key to start setting PROG 1 OFF . Follow the steps 4.3 to 4.6.
2.8
is correctly set.
2.9
To have more programs set, repeat the above steps.
1.4
Press OK key to confirm and minute now flashes, use +/- key to adjust minute.
2.10
When finish programs setting. press MENU key to quit or hold MENU key for 2 or more
1.5
Press OK key to confirm.
3x
seconds at any stage to go back to clock display format. If no key is pushed within 1
minute, the clock will be displayed.
2.
Setting the programs
2.11
To edit a particular program, locate it using MENU key and press OK key to edit it.
Press MENU key at clock display till
2.1
2.12
To remove a particular program, locate it using MENU key, then press OK key and set
can be set for each day of the week.
the day to -:-- using +/- key.
Press MENU key till the screen shows, 1 ON display on the LCD.
2.2
2.3
Press OK key to start setting. MO, TU till SU will flash, at this stage, use +/- key to
3. Operating modes of the timer
adjust day or days you want. Weekday only or. weekend only is also possible.
Press MANUAL key at clock display to select desired operating mode of the timer:
2.4
Press OK key to confirm and hour will be flashing, use +/- to adjust hour, check if AM /
+ OFF: output is cut off and the programs are deactivated.
PM is set correctly.
+ ON: output is constantly and the programs are deactivated.
2.5
Press OK key to confirm and minute will flash, use +/- to adjust minute.
AUTO OFF/AUTO ON: the timer runs in accordance with the programs previously set. The code of the
Press OK key to confirm and PROG 1 ON is now correctly set.
ongoing program is shown in the screen . OFF indicates that there is no output and ON indicates that
2.6
9.
there is output in the outlet.
Press MENU key and the screen will show 1 OFF .
2.7
Timer active
Press OK key to start setting PROG 1 OFF . Follow the steps 4.3 to 4.6.
2.8
2.9
To have more programs set, repeat the above steps.
2.10
When finish programs setting. press MENU key to quit or hold MENU key for 2 or more
View of LCD:
seconds at any stage to go back to clock display format. If no key is pushed within 1
minute, the clock will be displayed.
2.11
To edit a particular program, locate it using MENU key and press OK key to edit it.
2.12
To remove a particular program, locate it using MENU key, then press OK key and set
the day to -:-- using +/- key.
Function of
key:
3. Operating modes of the timer
Taste
Press MANUAL key at clock display to select desired operating mode of the timer:
MENU
+ OFF: output is cut off and the programs are deactivated.
+/>>
+ ON: output is constantly and the programs are deactivated.
-/<<
AUTO OFF/AUTO ON: the timer runs in accordance with the programs previously set. The code of the
MANUAL
ongoing program is shown in the screen . OFF indicates that there is no output and ON indicates that
OK
there is output in the outlet.
CTD/COUNTDOWN
RESET/R
Specifications of the timer:
+ It is provided with a buffer battery
6
+ Daily and weekly programmable
+ In a week the timer can be programmed for 16 different start-up and start-off (8 start-up and 8 start-off).
1.
Setting the clock
6.
I NSTRUC TI O N M ANU AL
=
PROG
Funktion
Wechsel zwischen CLOCK und PROGRAM Modus
Um eins nach oben
Um eins nach unten
Wechsel zwischen OFF/AUTO OFF/ON/AUTO ON Modus
Bestätigung der Einstellungen
Start der Countdown Funktion
Reset aller Einstellungen
I NSTRUC TI O N M ANU AL
* For the first use please press the RESET button key !
=
Funktion
Wechsel zwischen CLOCK und PROGRAM Modus
will display on upper right corner.
Um eins nach oben
Um eins nach unten
Wechsel zwischen OFF/AUTO OFF/ON/AUTO ON Modus
Bestätigung der Einstellungen
Start der Countdown Funktion
Reset aller Einstellungen
* For the first use please press the RESET button key !
change
intensity
(3x)
change
color
(3x)
I NSTRUC TI O N M ANU AL
=
AUTO
Funktion
Wechsel zwischen CLOCK und PROGRAM Modus
Um eins nach oben
Um eins nach unten
Wechsel zwischen OFF/AUTO OFF/ON/AUTO ON Modus
Bestätigung der Einstellungen
Start der Countdown Funktion
Reset aller Einstellungen
* For the first use please press the RESET button key !
http://www.hagleitner.com/en/downloads/aroma-diffuser/
Setting the time
View of LCD:
=
Function of
key:
Taste
MENU
+/>>
-/<<
MANUAL
OK
CTD/COUNTDOWN
RESET/R
Specifications of the timer:
+ It is provided with a buffer battery
+ Daily and weekly programmable
+ In a week the timer can be programmed for 16 different start-up and start-off (8
1.
Setting the clock
1.1
Press MENU key at clock display,
1.2
Press OK key, MO will flash and start to set current time, use +/- key to
weekday or weekend.
1.3
Press OK key to confirm and hour will flash, use +/- to adjust hour.
is correctly set.
1.4
Press OK key to confirm and minute now flashes, use +/- key to adjus
1.5
Press OK key to confirm.
2.
Setting the programs
Press MENU key at clock display till
2.1
can be set for each day of the week.
Press MENU key till the screen shows, 1 ON display on the LCD.
2.2
2.3
Press OK key to start setting. MO, TU till SU will flash, at this stage
adjust day or days you want. Weekday only or. weekend only is also p
2.4
Press OK key to confirm and hour will be flashing, use +/- to adjust h
PM is set correctly.
2.5
Press OK key to confirm and minute will flash, use +/- to adjust minu
Press OK key to confirm and PROG 1 ON is now correctly set.
2.6
Press MENU key and the screen will show 1 OFF .
2.7
wait
Press OK key to start setting PROG 1 OFF . Follow the steps 4.3 to 4.
2.8
2.9
To have more programs set, repeat the above steps.
2.10
When finish programs setting. press MENU key to quit or hold MEN
is shown on the screen. Up to 9 programs
seconds at any stage to go back to clock display format. If no key i
minute, the clock will be displayed.
2.11
To edit a particular program, locate it using MENU key and press O
10 sec.
2.12
To remove a particular program, locate it using MENU key, then pre
the day to -:-- using +/- key.
3. Operating modes of the timer
will display on upper right corner.
Press MANUAL key at clock display to select desired operating mode of
+ OFF: output is cut off and the programs are deactivated.
+ ON: output is constantly and the programs are deactivated.
AUTO OFF/AUTO ON: the timer runs in accordance with the program
ongoing program is shown in the screen . OFF indicates that there is
there is output in the outlet.
wait
is shown on the screen. Up to 9 programs
10 sec.
Information for programming:
I NSTRUC TI O N M ANU AL
CLOCK
Funktion
Wechsel zwischen CLOCK und PROGRAM M
Um eins nach oben
Um eins nach unten
Wechsel zwischen OFF/AUTO OFF/ON/AUT
Bestätigung der Einstellungen
Start der Countdown Funktion
Reset aller Einstellungen
* For the first use please press the RESET button ke
will display on upper right cor
locked
locked
is shown on the screen. U
Werbung
