Installation For Mac; Device Driver Installation - j5 create JUH410 Bedienungsanleitung

USB 3.0 MULTI-ADAPTER

INSTALLATION FOR MAC

Device Driver Installation

Installing the device driver enables your computer's operating system to recognize the USB3.0
Multi-Adapter. Be sure that you are referring to the appropriate installation procedure before
you begin installing.
※ Make sure the USB cable is unplugged from your Mac Desktop or Mac Notebook before
executing the setup program.
This section illustrates the device driver installation procedure for a computer running Snow
Leopard.
1. Insert the Driver CD into the CD-ROM drive;
and run the .dmg file to load drivers in the
mac install folder
2. The installation page will be launched;
To begin installation click on start Get Last
Driver online, please make sure you are
connected to the internet or press
to start the installation.
3. Click Continue to proceed
4. Type in your password and click OK 5. Click Continue Installation
12
USER MANUAL