General Warnings - Motostar LIVIPR Installationsanleitung

General warnings

Important personal safety instructions: READ CAREFULLY!
•
Installation, programming, commissioning and maintenance must only be performed by qualified and experienced personnel
•
in compliance with applicable regulations.
Wear antistatic shoes and clothing if working on the control board.
•
Keep hold of these warnings.
•
Always disconnect the electrical power supply during cleaning or maintenance.
•
This product should only be used for the purpose for which it was explicitly designed. Any other use is considered dangerous.
•
The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
•
Description
LVC/01: colour video entry panel for X1 systems.
Dimensions A
A
30
99
99 30
B
1080 mm
94¡
43,5 mm
43,5 mm
163,5 mm
163,5 mm
135
1080 mm
94¡
H= 165 cm
(RECOMMEN-
DED HEIGHT)
500 mm
500 mm
Wall mounting C D
6.5
135
6.5 3.5
Remove the front plate using the Allen key supplied.
3.5
Secure the entry panel at the desired height using the dowels
supplied. Take into account the positioning of the camera lens.
Pass through cable A and remove the terminal cover 2.
Make the connections.
Replace the terminal covers and proceed with assembly of the
accessories.
Perform programming and adjustment on the entry panel as
described in the "Programming Manual". Replace the front
plate.
C