Safety Instructions - Kiwi kow 5323 Bedienungsanleitung

SAFETY INSTRUCTIONS

• Please read the instruction manual carefully before using the device. Please keep these
instructions, the guarantee certificate, the sales receipt and, if possible, the carton with the
inner packaging. • This appliance is not intended to be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instructions concerning the use of the appliance by a
person that is responsible for their safety. • By ignoring the safety instructions the manufacturer
can not be hold responsible for the damage • To protect children against the dangers of an
electrical appliances, please make sure that you never leave the appliances unattended. There
for you have to select a storage place for the appliance where children are not able to grab it.
Make sure that the cable is not hanging in a downward position. • This appliance is only to be
used for household purposes and only for the purpose it is made for. • The appliance must be
placed on a stable, level surface. • Do not use when the appliance is fallen, there are any igns
of damage or when it leaks. • Do not touch hot surfaces. Use handles or knobs. • Never use
the device unsupervised. • All repairs should be made by a competent qualified electrician(*).
• Make sure that the appliance is stored in a dry environment. • Check if the voltage of the
appliance corresponds to the main voltage of your home. Rated voltage: AC220-240V 50Hz.
The socket must be at least 16A or 10 A slow-protected. • "This appliance complies with all
standards regarding electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on scientific evidence
available today" • Never move the appliance by pulling the cord and make sure the cord can not
become entangled. • Do not use this appliance outdoors. • "Do not wind the cord around the
appliance and do not bend it." • Allow the appliance to cool down before you clean or store it.
• To protect yourself against an electric shock, do not immerse the cord, plug or appliance
in the water or any other liquid. • Do not use this appliance with a damaged cord or plug or
when the appliance has malfunctions, or has been damaged in any manner. To avoid a hazard
make sure that a damaged cord or plug will be replaced by an authorized technician(*). Do
not repair this appliances by yourself. • Do not use this appliance near direct heat sources. •
Unplug the appliance from the socket when you are not using it. • Note: To avoid danger by
accidental resetting the thermal protection, this appliances may not be powered through an
xternal switching device, such as a timer, or connected to a circuit that regularly will be
switched on or off. • Using an extension cord or something similar is not allowed. • Make sure
that the cord is not hanging over the edge of the table or counter, does not touch any hot
surfaces or is coming directly into contact with the hot parts of the appliances. Don not place
the appliance underneath or close to curtains, window coverings etc • Make sure the cord does
not touch the hot parts of the appliance. • We advise to place a heat resistant coating between
your table and the appliance (this way you don't get burns on your table or table cloth). • Do not
use this appliances in the bathroom or near a sink filled with water. If this appliances has fallen
into the water do not under no circumstances directly grab this appliances but first pull the
plug from the socket. • Children should be supervised to ensure that they do not play with the
appliance. surface may get hot during use. * Competent qualified electrician: after sales
department of the producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all danger. In any case you should
return the appliance to this electrician.
USE
• Turn on the hot plate (No. 1) by turning the switch (No. 2) clockwise. The red control light
(No. 3) lights up. • You can select the desired temperature by turning the knob clockwise, 1 for
the lowest temperature and 5 for the highest level. • If the temperature which belong to the
set position is reached, the red control light turns off. • After the temperature dropped, the
thermostat will turn the hot plate back on again.
2