Note:
• Place the machine on flat ground, and keep it far from around things at least 50cm.
• Make sure the socket can be reached from machine location.
• Keep the machine stand upright so that compressor can work well.
• Don't run the machine near to gasoline or any other flammable liquids.
• Make sure free access of air-inlet and air-outlet.
• Don't use spraying agent (such as pesticides, paint) or other flammable materials,
otherwise plastic deformation, or even electric damage of the machine may be caused.
Power supply
• Make sure no damage in plug.
• Don't use connector instead of plug.
• Insert pug into socket first, then turn on socket switch, press key "POWER" to run
machine.
• Make sure CLIM2011 CI will be connected to supply with system impedance no more
than 0.183 ohm. In case necessary, please consult with your supply authority for system
impedance information.
Please safekeep this user's manual.
GB-3