Adjusting The Volume; Battery Charge Level/Low Battery Indication; Receiving/Transmitting Communications - Floureon xf-388 Gebrauchsanweisung

2. Adjusting the volume

To increase the volume, press the Up adjustor button (4) and press the
Down (7) button to decrease volume.
Note: The volume level (3) is displayed on the screen.

3. Battery Charge Level/Low Battery Indication

The battery charge level is indicated by the number of squares present
inside the battery icon on the LCD Screen.
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
When the battery charge level is low, the battery icon will flash and a
beep will be heard to indicate that the batteries need to be replaced or
recharged.

4. Receiving/transmitting communications

The devices are in 'Reception' mode when lit up, i.e. they are ready to
receive a call or sound transmitted on the activated frequency.
• When you press the Call tone button (12), the device switches to
'Transmission' mode. You are then transmitting a sound signal to the
other device.
• To send a voice message, press the TALK button (15) and speak
into the microphone (10). Continue to press the button until you have
finished transmitting your message.
Hold the microphone a minimum of 5 cm from your face.
Note:
- The other device must be set to the same channel and have set the
same CTCSS code(see point 7)
- When the transmission is complete and the TALK button (15) is no
longer held down, the other device will emit a sound (BEEP) to indicate
that this device is ready to transmit.
EN-5