Clip Sonic TEA111 Bedienunganleitung Seite 9

Congratulations on selecting our Bluetooth® keyboard!
1. Packing Contents:
Bluetooth® keyboard
USB Power charging Cable
User's Manual
Foot pad (only for some special Aluminum Bluetooth® keyboard)
Bluetooth® Keyboard Specification and Pairing Instruction
2.0 Keyboard Specification
Bluetooth® 3.0 interface standard
Operating Distance up to 10 meters
Modulation System :GFSK
Operation Voltage:1.8-3.6v
Working Current:<2.0mA
Standby Current:0.3-0.5mA
Sleeping Current:<25uA
Charging Current:≥100mA
Standby Time: 60day
Uninterrupted working time:60 hours
3.0 Bluetooth® Keyboard Pairing( iPad as an example to illustrate)
Step 1: Make sure your keyboard is turned on. The [power] indicator light will be on for 4
seconds, then the light will go off.
Step 2: Press on the [connect] button. The [Bluetooth®] indicator light will be blinking; The keyboard is now
ready to be connected to iPad.
Step 3: Check that your iPad 's Bluetooth® feature is ON. Select Settings > Bluetooth® > On.
Step 4: Select "Bluetooth® keyboard TEA111" on the iPad's Devices menu.
Step 5: Bluetooth® Keyboard TEA111 found. Click on the device to connect.
Step 6: if your iPad requests a PIN, enter the code on the Bluetooth® Keyboard instead of your iPad's virtual
keyboard, press "enter" to finish the Pin input.
Step 7: Bluetooth® keyboard connected successfully. [power] /[Bluetooth®] indicator light will turn off.
Special Note:
For other Bluetooth® enabled device, please verify the Bluetooth® standard & compatibility before attempting to
connect to the keyboard.
User manual
2