Kernau KFMO 202 EGS Bedienungsanleitung Seite 29

EN
29
OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters to
meet your needs better for cooking.
Switch Instructions
There are two switches on the panel. For better operations, the manual call the left switch
for digital switch. Call the right switch for multi-function switch.
• Waiting State Instructions
In waiting states, the screen displays the current time or "0:00".
1) When electrifying for the first time, the unit enters into the waiting state ;
2) When cooking finish, the unit enters into waiting state ;
3) When setting the clock, press "Start/+30Sec." to confirm, then the unit enters into
waiting state ,the screen displays the current clock.
• Clock Setting
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once. Then the unit enters waiting state .
1) Turn multi-function switch to "Clock", the hour figure flash;
2) Turn digital switch to adjust the hour figures, the input time should be within 0--
23.
3) Press "Start/+30Sec." to confirm, the minute figures will flash.
4) Turn digital switch to adjust the minute figures, the input time should be
within 0--59.
5) Press " Start/+30Sec." to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you do not press " Start/+30Sec." to confirm
in 1 minutes, the oven will go back to the previous status automatically.