Technical Specifications; Disposal And Recycling - Scheppach BPS4.0-40Li Originalbetriebsanleitung

• Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
• Pointed objects, such as nails or screwdriv-
ers, or external forces may damage the battery.
This may cause an internal short-circuit and the
battery to burn, smoke, explode or overheat.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operating
the electric tool.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.

Technical specifications

Battery type
BPS2.5-40Li
Nominal voltage
Capacity
Operating tempera-
ture
Weight
Battery state of charge
• Press the button to check the state of charge at the
state of charge indicator LED.
The indicator goes out after 5 seconds. If the LED
flashes, the battery must be recharged. If the LED
not lights up after the button is pressed, the battery is
faulty and must be replaced.
Information to ensure a long battery service life
m CAUTION!
• Never charge batteries at temperatures below 0 °C
or above 40 °C.
• Do not charge batteries in an environment which
has high air humidity or at a high ambient tempera-
ture.
• Do not cover batteries and/or the battery charger
during the charging process.
• Disconnect the charger mains plug after charging
the battery.
Battery and charger heat up during the charging pro-
cess. This is perfectly normal! Lithium ion batteries
do not exhibit the well known "memory effect". Nev-
ertheless, before a battery is recharged, it should be
fully discharged and the charging process always run
to the end.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
BPS4.0-40Li
40 V max. DC
2,5 Ah 4 Ah
0 - 40 °C
0,85 kg 1,3 kg
NOTE
• Follow the instructions for charging the battery in
the operating instructions for the electric power tool
and the battery charger.
• Reduced operating times after recharging indicates
that the battery is worn out. The battery must be
replaced.
• If the batteries are not used for a prolonged period,
store batteries partially charged and in a cool loca-
tion (10–25 °C).
Transport
The equivalent lithium content of the batteries includ-
ed in the product package is below the appropriate
limit values. Therefore the battery as an individual
component as well as the power tool and its product
package are not subject to national or international
dangerous goods regulations. If several machines
with lithium ion batteries are transported, these
regulations may become relevant and special safety
measures may be required (e.g. for the packaging). In
this case find out about the currently valid regulations
for the country of use.
m CAUTION!
Do not post batteries which have a damaged casing.
m CAUTION!
Returns only possible in the original box.

Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Disposal information
m WARNING!
Do not throw accumulators/batteries into the house-
hold waste, fire or water. Do not open disused bat-
teries. Accumulators/batteries should be collected,
recycled or disposed of in an environmentally friendly
manner.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment.
9 | GB