Charging The Earphones - Proze TWS - 02 Bedienungsanleitung

OVERVIEW

CHARGING THE EARPHONES

To charge the earphones, just place them into the charging case. The case has magnets and will
pull them into the correct position to charge as you place them in. Please ensure the correct
orientation or they will not charge correctly
When they start charging the lights will go solid red
When they are fully charged they will go solid blue
CHARGING THE CASE
We recommend placing the earphones in the car and charging via USB for up to 1 hour before
first use, to ensure that the batteries are all fully charged and show all 4 lights and the earphones
are green.
To charge the Case, locate the Micro USB on the back and then using the USB cable included
plug it into a USB power source, we recommend a computer or suitable USB charger port.
There are 4 lights in the case and this is the battery indication. When all 4 lights are on, the case is
charged.
Once fully charged and all lights on, you can then use the button inside the case (beneath the
lights) to turn the charging case ON or OFF.
Press once to turn ON and press twice to turn OFF
The lights show red when charging and blue once fully charged. The lights will go out after 1
minute once fully charged to save battery.