Dometic PerfectView REC400 Montage- Und Bedienungsanleitung Seite 15

REC400
Setting the display mode
Once you have started up the device, you can select whether you wish to view all
four camera images or the images from the first camera input (CAM1) live by using the
menu item "Live Screen Mode Setting". The preferred setting is saved as the
standard setting.
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 14).
➤ Use
or to choose between multi-channels (all four cameras) or channel 1
(camera 1).
➤ Press
to confirm.
✓ The screen will switch to the live screen mode.
Setting recording properties
You can make the following settings under the menu item "Record Setup":
• Recording resolution: D1 (720 x 576 pixels) / CIF (352 x 288 pixels)
• Recording speed: 5/15/20/25/30 frames per second (D1 max. 15 /
CIF max. 30)
• Recording quality: low/normal/high
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 14).
➤ Use
or to select the parameters.
➤ Confirm by pressing
✓ The screen will switch to the live scree mode.
EN
.
Setting the video recorder
15